167
11.14 EN
4.6 Tilting the Cab
DANGER!
X
Before tilting the cab, allow the motor
and muffler to cool off. Unlock the
muffler and tilt it back.
Procedure
• To do this release the lever (236) and
unlock the button (235). The muffler
can be carefully turned back as far as
the stop.
• After the cab is lowered, move the muffler back to its vertical position and lock it in
place.
4.6.1 Raising the Cab Manually
Procedure
• Remove the pump rod (239) from the
holder behind the driver's seat.
• The lift pump is fed into the cab through
inlets in the chassis on the right side of the
truck (237 = lift; 238 = lower)
CAUTION!
Before activating the lift pump always
close the lowering valve.
•
• To close, insert the long side of the pump
rod through the infeed (238) onto the hex.
bolt of the lowering valve and carefully
turn clockwise.
To Next Page
Loading...
Need help?
General
