Jungheinrich TFG 670 User Manual

19
11.14 EN
3 Technical Specifications
All technical details refer to standard trucks.
Values indicated with *) may vary, depending on the
types of equipment used (e.g. mast, cabin, tyres etc.).
Z The technical specifications comply with the German "Industrial Truck Data Sheet"
Guidelines.
Technical modifications and additions reserved.
3.1 Performance data
DFG 660-690
1)
for vertical mast.
2)
The values shown represent the maximum gradeability to overcome short
differences in height and surface unevenness (surface edges). The truck must not
operate on inclines of more than 15%.
Component 660 670 680 690
QCapacity
1)
6000 7000 8000 9000 kg
C Load centre distance 600 600 600 600 mm
Travel speed * with /
without load
22.4/22.5 22.4/22.6 22.4/22.5 22.4/22.6 km/h
Lift speed with / without
load
0.50/0.60 0.40/0.60 0.40/0.60 0.40/0.60 m/s
Lowering speed with /
without load
0.60/0.36 0.60/0.36 0.60/0.36 0.60/0.36 m/s
Gradeability
2)
with / without load
30.3/32.0 28.7/31.0 27.1/31.0 24.6/28.0 %
Tow force
with/without load
49.5/49.5 49.5/49.5 49.5/49.5 49.5/49.5 kN
Acceleration* with /
without load to 15 m
6.0/5.0 6.0/5.0 6.0/5.0 7.0/6.0 sec
Available working
pressure
for attachments
160 160 160 160 bar
Oil flow
for attachments
80 80 80 80 l/min

Jungheinrich TFG 670 Specifications

General

Brand	Jungheinrich
Model	TFG 670
Category	Front End Loaders
Language	English