11.14 EN
200
10 Maintenance checklist DFG
10.1 Operating Company
10.1.1 Standard Equipment
Brakes W A B C
1 Test brakes. t
Electrical System W A B C
1
Test warning and safety devices in accordance with operating
instructions.
t
2 Test displays and controls. t
3 Test Emergency Disconnect switch. t
Power Supply W A B C
1
Check battery cable connections are secure, grease terminals if
necessary.
t
2 Check battery and battery components. t
Travel W A B C
1 Check coolant level and top up if necessary. t
2 Check and clean radiator. t
3 Check tyre air pressure and top up if necessary. t
4 Check wheels for wear and damage. t
5 Check engine oil level, top up if necessary. t
Chassis and Superstructure W A B C
1 Check doors and/or covers. t
2 Check labels are legible and complete. t
3
Check engine compartment for contamination and clean if
necessary.
t
4
Check overhead guard and / or cab are secure and check for
damage.
t
5 Test driver's seat restraint system and check for damage. t
Hydraulic operations W A B C
1 Check load chain lubrication and lubricate if necessary. t
2 Test hydraulic system. t
3 Check hydraulic oil level and top up if necessary. t
4 Check forks or load handler for wear and damage. t
To Next Page
Loading...
Need help?
General
