58
CE MARKING
5 Certication
5.1 CE Marking
CE marked drive converters have been developed and manufactured to comply with the
regulations of the Low-Voltage Directive and EMC directive.The harmonized standards
of the series EN 61800-5-1and EN 61800-3 were used.
Further information can be found in the download area of www.keb.de under the
search term „Declaration of conformity“.
5.2 Functional safety
Drive converters with functional safety are marked with the FS logo on the nameplate.
These units are designed and manufactured in accordance with the Machine Directive.
The harmonized standard of the series EN 61800-5-2 is used.
5.3 Annex to the declaration of conformity
Annex to the EC declaration of conformity for systems with functional safety:
Product designation: Drive converter - series xxS6(A / K)xx-xxxx
Dimension 07 - 14
Voltage class 400 Vac
Herebywedeclarethatthesafetycomponentspeciedabovecomplieswithallrelevant
regulations of the machine directive.
Thesafetycomponentspeciedabovemeetstherequirementsofthefollowingguide-
lines and standards:
• Machine directive 2006/42/EC
• EMC directive 2014/30/EU
• Low-Voltage Directive 2014/35/EU
• Hazardous substances 2011/65/EU
To Next Page
Loading...
Need help?
General
