1-4 Return to Section Topics 2600S-901-01 Rev. C / January 2008
Section 1: Getting Started Series 2600 System SourceMeter® Instruments Reference Manual
Handling precautions
• Always grasp the Series 2600 by the covers or by the handle.
• After removing the Series 2600 from its anti-static bag, inspect it for any obvious signs of
physical damage. Report any such damage to the shipping agent immediately.
• When the Series 2600 is not installed and connected, keep the unit in its anti-static bag and
store it in the original packing carton.
Package content
The following items are included with every Series 2600 order:
• Model 2601, 2602, 2611, 2612, 2635, or 2636 SourceMeter with line cord
• TSP-Link cable for Models 2601, 2602, 2611, and 2612
• Accessories as ordered
• Certificate of calibration
• CD-ROMs that contain:
• PDFs of the User’s and Reference Manuals
• Test Script Builder script development software
The following additional items are included with the Models 2611, 2612, 2635, and 2636
SourceMeters:
• Model 2600-IAC Interlock connector adaptor
The following item is for Models 2601, 2602, 2611, and 2612 only:
• Device under test (DUT) interface connector kit for each SourceMeter channel; kit includes
one hooded screw terminal connector that mates with the SourceMeter measurement
terminals
The following items are for Models 2635 and 2636 only:
• SC-73-0 6" ground wire.
• TSP-Link cable
• 2600-ALG-2 low noise triax cable with alligator clips, UL approved for up to 42V, 2m (6.6ft)
(2 with Model 2636 and 1 with Model 2635)
• Quick start guide
Options and accessories
GPIB cables, interfaces, and adaptors (connects Series 2600 to the GPIB bus)
Models 7006-1 and 7006-2: Single-shielded GPIB cables. Terminated with one straight
connector (non-stacking) and one feed-through connector. Model 7006-1 is 1m long; Model
7006-2 is 2m long.
KPCI-488LP IEEE-488: Interface/Controller for the PCI Bus.
KPXI-488 IEEE-488: Interface Board for the PXI Bus.
To Next Page
Loading...
Need help?
General
