To Next Page

To Previous Page

Series 3700

System Switch/Multimeter User's Manual Section 6:

ICL Command List

Document Number: 3700S

-900-01 Rev. A / August 2007 6-

scan.trigger.channel.set()

scan.trigger.channel.stimulus

scan.trigger.clear()

scan.trigger.measure.clear()

scan.trigger.measure.set()

scan.trigger.measure.stimulus

scan.trigger.sequence.clear()

scan.trigger.sequence.set()

scan.trigger.sequence.stimulus

setup functions and attribute

Use the functions and attributes in this group to save and recall setups, and to set the power-on

setup. Available commands:

setup.poweron

setup.recall()

setup.save()

setup.cards()

slot[X] attributes

The attributes in this group indicate whether a card in slot X (where X = 1 to 6) supports different

features (for example, pole settings, voltage or 2-wire measurements, etc.,). To query an

attribute, use the print command sending the attribute as an argument.

For example:

print(slot[1].idn)

This command will output a comma separated string that contains the model number,

description, firmware revision and serial number of the card installed in Slot 1. Available

commands:

slot[X].commonsideohms

slot[X].endchannel.amps

Keithley 3730 User Manual

Other manuals for Keithley 3730