To Next Page

To Previous Page

3-14 Remote Operation Model 6517A Getting Started Manual

V-Source

:SOURce SOURce Subsystem

:VOLTage <n> Specify V-Source level (0 to ±1000V).

:RANGe <n> Select range; ≤100 = 100V range, >100 = 1000V

range.

:LIMit Path for voltage limit:

[:AMPLitude] <n> Specify voltage limit; 0 to 1000 (V).

:STATe Enable or disable limit.

:MCONnect Enable or disable V-Source LO to ammeter LO

connection.

:CURRent Path for current limit:

:RLIMit Path to control resistive current limit:

:STATe Enable or disable resistive I-limit.

:LIMit Path to check current compliance:

[STATe]? Query state of current compliance.

Data store (Buffer)

:TRACe TRACe Subsystem

:ELEMents <name> Select reading elements :TSTamp, HUMidity,

CHANnel, ETEMperature, VSOurce, NONE.

:POINts <n> Specify buffer size.

:FEED Path to control buffer:

:CONTrol <name> Select control mode and enable buffer: NEVer,

NEXT, ALWays, or PRETrigger.

:DATA? Read all readings in buffer.

NOTE See User’s Manual to use :PRETrigger.

Open/close channels and scan

:ROUTe ROUTe Subsystem

:CLOSe <list> Close speciﬁed channel.

:STATe? Query the closed channel.

:OPEN <list> Open speciﬁed channel.

:OPEN:ALL Open all channels.

:SCAN Path to control scanning:

[:INTernal] <list> Specify internal scan list: 2 to 10 chans.

:EXTernal <list> Specify external scan list: 1 to 400 chans.

:SMEThod <name> Specify settling time for internal card; 0 to

99999.9999 (sec.).

:LSELect <name> Enable the speciﬁed scan: INTernal,

EXTernal or NONE.

Keithley 6517A Getting Started Guide

Other manuals for Keithley 6517A