Kenwood C-V751 User Manual

42
Listening to radio broadcasts
9 Press the “Enter” icon to enter in memory.
(Select the icon)
0 Press the “Enter” icon.
GRC
When you press key, ...................................
When you press
key, ..................................
2 1 3394038
÷ Every time the key is pressed, the next station in the order of the preset
number is received.
If the key is held pressed .............. Preset stations will be received suc-
cessively for about half a second each.
GRC
2 1 3394038
The preset number
decreases.
The preset
number
increases.
(Select the icon)
1 Select the preset number of the desired
station by pressing
or .
Receiving all preset stations in order
(P. CALL)
Receiving a preset station
Preset number stored in memory
KHz TIMER 1 2 TAPE2
/
FM
LW
MW
AUTO SOUND
O
.
TUNED
E
E
ON
TP
T
A NEWS
CLIP
PRO LOGIC
DIGIT
A
3 S
T
AM
DOW
N
DIGIT
A
DTS DOLBY
DIGIT
A
15 89. ))
MHz SLEEP
STEREO
÷ Enter the preset number (max. 40) of the desired radio station.
GRC
1 Press the preset call icon.
Preset call icon
3 Press the “Enter” icon.
(Select the icon)
To decresase
To incresase
2 Select the preset number of the desired
station by pressing
or .
÷ To preset other stations, repeat 6 to 9 for each of them.

Kenwood C-V751 Specifications

General

harmonic distortion	0.01 %
signal to noise ratio	93 dB
sensitivity / impedance	200 mV / 47kΩ
controls S	± 10 dB (at 100 Hz)
BLE	± 10 dB (at 10 kHz)
level / impedance E REC	200 mV / 1 kΩ
composite	1 Vp-p/75 Ω
sampling frequency	32 kHz, 44.1 kHz, 48 kHz
input (coaxial)	0.5 Vp-p/75 Ω
optical	-15 dBm~-21 dBm, 600 nm ± 30 nm
frequency range	87.5 MHz~108 MHz
sensitivity (DIN) O	1.2 µV (at 75 Ω) / 13.2 dBf (40 kHz dev., S/N 26 dB)
sensitivity (DIN) REO	35 µV (at 75 Ω) / 42 dBf (46 kHz dev., S/N 46 dB)
signal to noise ratio (DIN weighted at 1 kHz, 40 kHz dev.) O	65 dB (65.2 dBf input)
signal to noise ratio (DIN weighted at 1 kHz, 40 kHz dev.) REO	60 dB (65.2 dBf input)
sensitivity (DIN ± 300 kHz)	64 dB
separation (DIN, 1 kHz)	36 dB
frequency response	30 Hz~15 kHz, + 0.5 dB, – 3.0 dB
tuning frequency range	531 kHz ~ 1, 602 kHz
usable sensitivity (30% mod., S/N 20 dB)	20 µV / (700 µV / m)
signal to noise ratio (at 30% mod. 1mV input)	48 dB
tuning frequency range	531 kHz ~ 1, 602 kHz
usable sensitivity (30% mod., S/N 20 dB)	20 µV / (700 µV / m)
signal to noise ratio (at 30% mod. 1mV input)	48 dB
tuning frequency range	153 kHz ~ 279 kHz
usable sensitivity (30% mod., S/N 20 dB)	35 µV
signal to noise ratio (at 30% mod. 1mV input)	45 dB
power consumption	35 W
dimensions (W x H x D)	400 mm x 105 mm x 382 mm
weight (net)	5.2 kg
weight (net) (For Australia)	5.1 kg