Kenwood C-V751 User Manual

53
Ambience effects
Listen mode selection
The switching is not available when the DVD
6ch INPUT is selected.
•
Surround play of digital input
INPUT selector
Input signal
Listen mode
1 DTS
2 STEREO
DVD (COAXIAL), CD (OPTICAL)
DTS Dolby digital *1 PCM *1
1 DOLBY DIGITAL
2 PRO LOGIC
3 3 STEREO
4 STEREO
Surround play of analog input
INPUT selector
Input signal
Listen mode
DVD 6ch INPUT MD/TAPE1, VIDEO1, 2, CD, TUNER
Analog Analog *1
÷ The encoding channel is displayed only during decoding of Dolby
Digital/DTS. It is not displayed during Analog or PCM input operation.
1 PRO LOGIC
2 3 STEREO
3 CS CINEMA
4 CS MUSIC
5 ARENA (DSP)
6 THEATER (DSP)
7 JAZZ CLUB (DSP)
8 STEREO
Checking the current status (Status) (Remote control only)
1 Select the “listen mode” icon.
GRC
l
i
s
t
e
n
m
o
d
e
(Select the icon)
2 Select the “Status” icon.
(Select the icon)
Input mode of the signal
being input
1 PRO LOGIC
2 3 STEREO
3 CS CINEMA
4 CS MUSIC
5 ARENA (DSP)
6 THEATER (DSP)
7 JAZZ CLUB (DSP)
8 STEREO
÷ *1: The possible selections may be limited depending on the played source and speaker setting.

Kenwood C-V751 Specifications

General

harmonic distortion	0.01 %
signal to noise ratio	93 dB
sensitivity / impedance	200 mV / 47kΩ
controls S	± 10 dB (at 100 Hz)
BLE	± 10 dB (at 10 kHz)
level / impedance E REC	200 mV / 1 kΩ
composite	1 Vp-p/75 Ω
sampling frequency	32 kHz, 44.1 kHz, 48 kHz
input (coaxial)	0.5 Vp-p/75 Ω
optical	-15 dBm~-21 dBm, 600 nm ± 30 nm
frequency range	87.5 MHz~108 MHz
sensitivity (DIN) O	1.2 µV (at 75 Ω) / 13.2 dBf (40 kHz dev., S/N 26 dB)
sensitivity (DIN) REO	35 µV (at 75 Ω) / 42 dBf (46 kHz dev., S/N 46 dB)
signal to noise ratio (DIN weighted at 1 kHz, 40 kHz dev.) O	65 dB (65.2 dBf input)
signal to noise ratio (DIN weighted at 1 kHz, 40 kHz dev.) REO	60 dB (65.2 dBf input)
sensitivity (DIN ± 300 kHz)	64 dB
separation (DIN, 1 kHz)	36 dB
frequency response	30 Hz~15 kHz, + 0.5 dB, – 3.0 dB
tuning frequency range	531 kHz ~ 1, 602 kHz
usable sensitivity (30% mod., S/N 20 dB)	20 µV / (700 µV / m)
signal to noise ratio (at 30% mod. 1mV input)	48 dB
tuning frequency range	531 kHz ~ 1, 602 kHz
usable sensitivity (30% mod., S/N 20 dB)	20 µV / (700 µV / m)
signal to noise ratio (at 30% mod. 1mV input)	48 dB
tuning frequency range	153 kHz ~ 279 kHz
usable sensitivity (30% mod., S/N 20 dB)	35 µV
signal to noise ratio (at 30% mod. 1mV input)	45 dB
power consumption	35 W
dimensions (W x H x D)	400 mm x 105 mm x 382 mm
weight (net)	5.2 kg
weight (net) (For Australia)	5.1 kg