Kenwood C-V751 User Manual

52
Ambience effects
1 PRO LOGIC
2 3 STEREO
3 CS CINEMA
4 CS MUSIC
5 ARENA
6 THEATER
7 JAZZ CLUB
8 STEREO
2 EFFECT LEVEL
Adjust with keys
and .
Select the DSP surround mode.
1 Select DSP.
÷ The effects of adjustments are applied equally to sound fields 5 to 7.
÷ Switching is not possible when the DVD 6ch INPUT is used.
•
Select the adjustment parameter.
1 Display the setup screen.
GRC
GRC
÷ This can be selected when the input signal is other than DTS, Dolby
Digital (AC-3).
2
1
Each press LISTEN MODE key switches the indication.
l
i
s
t
e
n
m
o
d
e
(Select the icon)
1 WALL TYPE
Select “Soft”, “Medium” or “Hard”.
÷ The EFFECT level can be adjusted between 1 and 3.
To decrease
To increase
Main unit
To select the DSP mode
(DSP)
2 Select the “Arena” “Theater” “Jazz Club”.
(Select the icon)
÷ 2 cannot be selected when “C” has been set to Off in the Setup
operation.
÷ 1, 3 and 4 cannot be selected when “LS/RS” has been set to Off in
the Setup operation.
÷ The LISTEN MODE key is not accepted during headphone listening.

Kenwood C-V751 Specifications

General

harmonic distortion	0.01 %
signal to noise ratio	93 dB
sensitivity / impedance	200 mV / 47kΩ
controls S	± 10 dB (at 100 Hz)
BLE	± 10 dB (at 10 kHz)
level / impedance E REC	200 mV / 1 kΩ
composite	1 Vp-p/75 Ω
sampling frequency	32 kHz, 44.1 kHz, 48 kHz
input (coaxial)	0.5 Vp-p/75 Ω
optical	-15 dBm~-21 dBm, 600 nm ± 30 nm
frequency range	87.5 MHz~108 MHz
sensitivity (DIN) O	1.2 µV (at 75 Ω) / 13.2 dBf (40 kHz dev., S/N 26 dB)
sensitivity (DIN) REO	35 µV (at 75 Ω) / 42 dBf (46 kHz dev., S/N 46 dB)
signal to noise ratio (DIN weighted at 1 kHz, 40 kHz dev.) O	65 dB (65.2 dBf input)
signal to noise ratio (DIN weighted at 1 kHz, 40 kHz dev.) REO	60 dB (65.2 dBf input)
sensitivity (DIN ± 300 kHz)	64 dB
separation (DIN, 1 kHz)	36 dB
frequency response	30 Hz~15 kHz, + 0.5 dB, – 3.0 dB
tuning frequency range	531 kHz ~ 1, 602 kHz
usable sensitivity (30% mod., S/N 20 dB)	20 µV / (700 µV / m)
signal to noise ratio (at 30% mod. 1mV input)	48 dB
tuning frequency range	531 kHz ~ 1, 602 kHz
usable sensitivity (30% mod., S/N 20 dB)	20 µV / (700 µV / m)
signal to noise ratio (at 30% mod. 1mV input)	48 dB
tuning frequency range	153 kHz ~ 279 kHz
usable sensitivity (30% mod., S/N 20 dB)	35 µV
signal to noise ratio (at 30% mod. 1mV input)	45 dB
power consumption	35 W
dimensions (W x H x D)	400 mm x 105 mm x 382 mm
weight (net)	5.2 kg
weight (net) (For Australia)	5.1 kg