Setup Menu
AV
Interface Setup
You
can set
audio
and
visual
(AV)
interface
parameters.
o Display
the
AV Interface screen
Touch 'ii"'''!I!J'G''' , in the "Setup
Menu" screen (page
62).
D Setup each item
ITJ
Moves
to
the
"AV
Interface
2"
screen.
[I]
Sets
a name
to
be displayed when you
select a system that
is
connected
via
the
AV
IN
PUT
port.
([2]
"VI
DEO")
When using the rear view camera,
set
it
to
"R-CAM".
W
Sets
an
image display
of
the system that
is
connected
via
the
AV
INPUT
port.
([2]
"OFF")
"OFF":When the image source
is
switched,
an
image entered
via
the
AV
INPUT
port
is
displayed.
"ON":
When
an
image signal
is
entered
via
the
AV
INPUT
port, this image
is
displayed.
@]
Selects a navigation system connection.
([2]
"RGB")
"RGB":
Allows the Kenwood's Navigation
System
to
connect
via
the
AV
INPUT
port.
"AV-IN":
Allows a third-party navigation
system to connect
via
the
AV
INPUT
port.
"Off": Must be used if no navigation
system
is
connected. (The
navigation display
is
cancelled
when the
AV
source
is
switched.)
68
• KVT-514/KVT-S34DVD
WReturns
to
the
"AV
Interface
1"
screen.
WMoves
to
the
"AV
Interface
3"
screen.
[l]
Selects
an
AV
source to be
output
at the
AV
OUTPUT
port.
([2]
"AV-IN")
~
~
• When in DVD source,
"AV-OUT"
cannot be set
to
USB.
Or,
when
in
USB
source,
"AV-OUT"
cannot be set
to
DVD.
If
"AV-OUT"
is
set
to
DVD or
USB,
the
same source video
or control screen
as
the front
monitor
is
displayed in the
rear
monitor.
Ifthe front source
is
switched from DVD (or
USB)
to
another source,
the
rear source
is
also switched
to
the
same source
as
front.
In
this
case,
displaying
the
navigation screen in front
monitor
allows
the
rear source
to
return
to
the
DVD
(or
USB).
Use
the
easy
control
buttons
to
operate the front source.
ill
Sets
output
of
operation screen such
as
control screen
to
AV-OUT.
Operation screen
is
not
output
when set
to
"Black".
([2]
"Through")
W
Sets
a
method
to
switch to the rear view
camera video display.
([2]
"OFF")
"ON":
Switches
to
the rear view camera
video display when engaging the
shift knob
of
car to
"Reverse".
"OFF":Switches
to
the rear view camera
video display when engaging the
shift knob
of
car to
"Reverse"
and
then pressing the [NAV]
buttoll
for
more than
1 second.
Make sure to set the
AV-IN
Name
[I]
to
"R-CAM"
to activate
R-CAM
Interruption
function.
[Q]
You
can flip the left and right
of
the
rear
view camera video display.
Set
to "ON" and
the the rear view will be displayed left and
right in mirror image on the screen.
([2]
"OFF")
To Next Page
Loading...
Need help?
General
