Kenwood KVT-534DVD User Manual

Audio Control
Tone Setup
You can set a Tone curve.
o Display the Tone screen
See <Equalizer Control> (page 89).
D Set the Tone
_~ ~ ~ ~= 11'_ I
OJ Tone curve becomes flat.
rn Bass adjustment items are displayed.
WMiddle adjustment items are displayed.
fI] Treble adjustment items are displayed.
[]] Sets the Center frequency.
[§] Sets the level.
II] Sets the Qfactor. (Only Bass and Middle can
be
set)
W Bass DC Extend settings (Only when Bass is
selected)
If turned
"ON", it extends the bass
center frequency to the low register by
approximately
20%.
[]] Returns to the "Equalizer" screen.
90 8 KVT-S14/KVT-S34DVD
Zone Control
You can set the front and rear audio source.
o Display Zone Control
Touch .... h9'·i'i"·1 ' in the "Audio
Control Menu" screen (page
88).
OJ Displays the current source.
D Set the Zone Control
rn Turns the Zone Function (that sets different
source sounds for front and rear speakers)
On or Off.
W Sets the front and rear audio source
separately.
(This
button appears when the Zone
function
is On.)
~
~
• When the rear speaker sound is switched, the audio
source
that is output at the AV OUTPUT terminal is also
switched
to the same source.
fI] Adjusts the volume of the rear channel.
(This
button appears when the Zone
function
is On.)

Kenwood KVT-534DVD Specifications

General

Brand	Kenwood
Model	KVT-534DVD
Category	Car Receiver
Language	English