4127
Features of your vehicle
Turn signals and lane change
signals
The ignition switch must be on for the
turn signals to function. To turn on
the turn signals, move the lever up or
down (A).
The green arrow indicators on the
instrument panel indicate which turn
signal is operating. They will self-
cancel after a turn is completed.
If the indicator continues to flash
after a turn, manually return the lever
to the off position.
To signal a lane change, move the
turn signal lever slightly and hold it in
position (B). The lever will return to
the off position when released.
If an indicator stays on and does not
flash or if it flashes abnormally, one
of the turn signal bulbs may be
burned out and will require replace-
ment.
One-touch lane change function
To activate an one-touch lane
change function, move the turn sig-
nal lever slightly and then release it.
The lane change signals will blink 3
times.
✽✽
NOTICE
If an indicator flash is abnormally
quick or slow, a bulb may be burned
out or have a poor electrical connec-
tion in the circuit.
OYB046420
OYB046420R
â– Type A
â– Type B
To Next Page
Loading...
Need help?
General
