899
Maintenance
LIGHT BULBS
Bulb replacement precaution
Please prepare bulbs with appropriate
standards in case of emergencies.
Refer to “Bulb Wattage” in chapter 9.
When changing bulbs and sorts, first
turn off the engine at a safe place,
firmly apply the side brake and take
out the battery's negative (-) terminal.
Use only the bulbs of the specified
wattage.
WARNING - Working on
the lights
Prior to working on the light,
firmly apply the parking brake,
ensure that the ignition switch
is turned to the LOCK position
and turn off the lights to avoid
sudden movement of the vehi-
cle and burning your fingers or
receiving an electric shock.
WARNING
Be sure to replace the burned-
out bulb with one of the same
wattage rating. Otherwise, it
may cause extensive wiring
damage and possible fire.
CAUTION
If you don't have necessary
tools, the correct bulbs and the
expertise, consult a professional
workshop. Kia recommends to
consult an authorised Kia deal-
er/service partner.
In many cases, it is difficult to
replace vehicle light bulbs
because other parts of the vehi-
cle must be removed before you
can get to the bulb.This is espe-
cially true if you have to remove
the headlight assembly to get to
the bulb(s). Removing/ installing
the headlight assembly can
result in damage to the vehicle.
CAUTION
• If unauthentic parts or sub-
standard lights are used when
changing lights, it may lead to
fuse disconnection and mal-
function, and other wiring
damages.
• Do not install extra lamps or
LED to the vehicle. If supple-
mentary lights are installed, it
may lead to lamp malfunction
and flickering of the lights. In
addition, the fuse box and
other writing may be damaged.
To Next Page
Loading...
Need help?
General
