6133
Driving your vehicle
The BCW (Blind-Spot Collision
Warning) system uses a radar sen-
sor to alert the driver whilst driving.
It senses the rear side territory of the
vehicle and provides information to
the driver.
➀ BCW (Blind-Spot Collision Warning)
- Blind Spot Area
Warning range is dependent on your
vehicle speed. However, if the speed
of your vehicle is faster by 10km/h or
more than other nearby vehicles, the
warning is not operated.
- Closing at high speed
When vehicles are approaching to
your vehicle at high speed, the
warning is operated.
If the driver activates the turn sig-
nal when the system detects an
oncoming vehicle, the system
sounds an audible alert.
Distance from the approaching
vehicle can be seen differently
according to the relative speed.
➁ RCCW (Rear Cross-Traffic Collision
Warning)
When your vehicle moves backward,
the sensor detects approaching vehi-
cles to the left or right side direction
and warning is operated.
The feature will operate when the
vehicle is moving in reverse below
about 10 km/h (6 mph). If oncoming
cross traffic is detected a warning
chime will sound.
Distance from the approaching vehi-
cle can be seen differently according
to the relative speed.
BLIND-SPOT COLLISION WARNING (BCW) SYSTEM (IF EQUIPPED)
OBD058079L
To Next Page
Loading...
Need help?
General
