Driving your vehicle
726
The purpose of the FCA system is to
reduce the likelihood of the accident
or avoid it. It recognizes the distance
from the vehicle ahead or the pedes-
trian through the sensors (i.e. radar
and camera), and, if necessary,
warns the driver of accident risk with
the warning message or the warning
alarms.
System setting and activation
System setting
When the ignition switch is turned
on, Forward Collision-Avoidance
Assist (FCA) automatically gets acti-
vated.The system will come to a stop
if the driver release the system from
the instrument panel as follows :
'User settings → Driving Assistance
→ Forward Collision-Avoidance
Assist'
FORWARD COLLISION-AVOIDANCE ASSIST (FCA) (CAMERA + RADAR TYPE)
(IF EQUIPPED)
WARNING
Take the following precautions
when using the Forward
Collision-Avoidance Assist
(FCA):
• This system is only a supple-
mental system and it is not
intended to, nor does it replace
the need for extreme care and
attention of the driver. The
sensing range and objects
detectable by the sensors are
limited. Pay attention to the
road conditions at all times.
• NEVER drive too fast in accor-
dance with the road condi-
tions or whilst cornering.
• Always drive cautiously to
prevent unexpected and sud-
den situations from occur-
ring. FCA does not stop the
vehicle completely and does
not avoid collisions.
To Next Page
Loading...
