Features of your vehicle
284
Opening the bonnet
1. Pull the release lever to unlatch
the bonnet. The bonnet should
pop open slightly.
2. Go to the front of the vehicle, raise
the bonnet slightly, push the sec-
ondary latch (1) up side and lift the
bonnet (2).
3. Pull out the stay rod.
4. Hold the bonnet opened with the
stay rod (1).
BONNET
ODE046014R
ODEEV048015
WARNING
Open the bonnet after turning
off the vehicle on a flat surface,
shifting the drive dial to the
P(Park) position and setting the
parking brake.
ODE046016
WARNING
• Grasp the stay rod in the area
wrapped in rubber. The rubber
will help prevent you from being
burned by hot metal when the
motor compartment is hot.
• The stay rod must be inserted
completely into the hole provid-
ed whenever you inspect the
motor compartment. This will
prevent the bonnet from falling
and possibly injuring you.
To Next Page
Loading...
Need help?
General
