Maintenance
607
LIGHT BULBS
Bulb replacement precaution
Please prepare bulbs with appropriate
standards in case of emergencies.
Refer to “Bulb Wattage” in chapter 8.
When changing bulbs and sorts, first
turn off the vehicle at a safe place,
firmly apply the side brake and take
out the battery's negative (-) terminal.
Use only the bulbs of the specified
wattage.
WARNING - Working on
the lights
Prior to working on the light,
firmly apply the parking brake,
ensure that the ignition switch
is turned to the LOCK position
and turn off the lights to avoid
sudden movement of the vehi-
cle and burning your fingers or
receiving an electric shock.
WARNING
Be sure to replace the burned-
out bulb with one of the same
wattage rating. Otherwise, it
may cause extensive wiring
damage and possible fire.
CAUTION
If you don't have necessary
tools, the correct bulbs and the
expertise, consult a profession-
al workshop. Kia recommends
to consult an authorised Kia
dealer/service partner. In many
cases, it is difficult to replace
vehicle light bulbs because
other parts of the vehicle must
be removed before you can get
to the bulb. This is especially
true if you have to remove the
headlight assembly to get to the
bulb(s). Removing/ installing the
headlight assembly can result
in damage to the vehicle.
CAUTION
• If unauthentic parts or sub-
standard lights are used when
changing lights, it may lead to
fuse disconnection and mal-
function, and other wiring
damages.
• Do not install extra lamps or
LED to the vehicle. If supple-
mentary lights are installed, it
may lead to lamp malfunction
and flickering of the lights. In
addition, the fuse box and
other writing may be damaged.
To Next Page
Loading...
Need help?
General
