5121
Driving your vehicle
The BCW (Blind-Spot Collision
Warning) system uses a radar sen-
sor to alert the driver whilst driving.
It senses the rear side territory of the
vehicle and provides information to
the driver.
➀ BCW (Blind-Spot Collision Warning)
- Blind Spot Area
Warning range is dependent on your
vehicle speed. However, if the speed
of your vehicle is faster by 10km/h or
more than other nearby vehicles, the
warning is not operated.
- Closing at high speed
When vehicles are approaching to
your vehicle at high speed, the
warning is operated.
Distance from the approaching
vehicle can be seen differently
according to the relative speed.
➁ RCCW (Rear Cross-Traffic Collision
Warning)
When your vehicle moves backward,
the sensor detects approaching vehi-
cles to the left or right side direction
and warning is operated.
Distance from the approaching vehi-
cle can be seen differently according
to the relative speed.
BLIND-SPOT COLLISION WARNING (BCW) / REAR CROSS-TRAFFIC COLLISION WARN-
ING (RCCW) (IF EQUIPPED)
OBD058079L
WARNING
• Always check the road condi-
tion whilst driving for unex-
pected situations even though
the BCW (Blind-Spot Collision
Warning) system is operating.
• BCW (Blind-Spot Collision
Warning) system is a system
made for convenience. Do not
solely rely on the system but
always pay attention to drive
safely.
To Next Page
Loading...
Need help?
General
