521
Driving your vehicle
The selected regenerative braking
level is displayed on the instrument
cluster.
Initial setting of the regenerative
braking level vary according to the
selected Drive mode.
❈ For more details, refer to "Drive
Mode Integrated Control System"
in this chapter.
One pedal driving
The driver can stop the vehicle by
pulling and holding the left side pad-
dle shifter.
Operating Conditions
The system enters the operating
condition when the conditions below
are met:
• The driver's door is closed.
• The driver's seat belt is fastened.
To operate:
• Pull and hold the left side paddle
shifter whilst coasting.
• When the vehicle speed is above 3
km/h, release the paddle shifter to
return to the previously set level.
• When the vehicle speed is below 3
km/h, the function maintains con-
trol to stop the vehicle even though
the paddle shifter is released.
• Whilst the One pedal driving is in
activation, the driver can control
the vehicle stopping position using
the accelerator pedal.
ODEEV058260
Drive mode Initial setting
ECO+ 2
ECO 2
COMFORT 1
SPORT 1
To Next Page
Loading...
Need help?
General
