619
What to do in an emergency
Using the TMK
1. Detach the speed restriction label
(1) from the sealant bottle (2), and
place it in a highly visible place
inside the vehicle such as on the
steering wheel to remind the driv-
er not to drive too fast.
Carefully follow below steps.
2. Shake the sealant bottle.
3. Connect the filling hose (3) onto the
connector of the sealant bottle (A).
Then, connect the sealant bottle
connection to compressor (B).
4. Ensure that button (9) on the com-
pressor is not pressed.
ODEP067048 OKIA067011
ODEEV068006R
To Next Page
Loading...
Need help?
General
