1.7
Section 1
Safety and General Information
1
General Specifications¹
Power (@ 3600 RPM, corrected to SAE J1940)
SV470 ................................................................................................. 11.2 kW (15 HP)
SV480 ................................................................................................. 11.9 kW (16 HP)
SV530 ................................................................................................. 12.7 kW (17 HP)
SV540 ................................................................................................. 13.4 kW (18 HP)
SV590 ................................................................................................. 14.1 kW (19 HP)
SV600 ................................................................................................. 14.9 kW (20 HP)
Peak Torque
SV470 @ 2600 RPM ............................................................................34.3 N·m (25.0 ft. lb.)
SV480 @ 2800 RPM ............................................................................34.6 N·m (25.5 ft. lb.)
SV530 @ 2600 RPM ............................................................................37.8 N·m (27.9 ft. lb.)
SV540 @ 2800 RPM ............................................................................39.1 N·m (29.0 ft. lb.)
SV590 @ 2600 RPM ............................................................................42.3 N·m (31.2 ft. lb.)
SV600 @ 2800 RPM ............................................................................44.2 N·m (32.0 ft. lb.)
Bore
SV470S, SV480S .................................................................................84 mm (3.30 in.)
SV530S, SV540S .................................................................................89 mm (3.50 in.)
SV590S, SV600S .................................................................................94 mm (3.70 in.)
Stroke .........................................................................................................86 mm (3.38 in.)
Displacement
SV470S, SV480S .................................................................................477 cc (29.1 cu. in.)
SV530S, SV540S .................................................................................535 cc (32.6 cu. in.)
SV590S, SV600S .................................................................................597 cc (36.4 cu. in.)
Compression Ratio......................................................................................8.5:1
Dry Weight..................................................................................................35.8 kg (79 lb.)
Oil Capacity (with filter) .............................................................................. 1.5 L (1.6 qt.)
Angle of Operation - Maximum (at Full Oil Level) All Directions....................25° Intermittent
Air Cleaner Base
Hex. Nut Fastener Torque ...........................................................................5.5 N·m (48 in. lb.)
Mounting Screw Fastener Torque (Install Dry - DO NOT OIL).......................8.0 N·m (70 in. lb.) Into new as-cast hole
5.5 N·m (48 in. lb.) Into used hole
Blower Housing and Sheet Metal
M6 Fasteners Torque .................................................................................. 7.5 N·m (65 in. lb.)
Cam Lever
Cam Lever Fastener Torque .........................................................................7.5 N·m (65 in. lb.)
Cam Gears
End Play .....................................................................................................0.5/1.5 mm (0.019/0.059 in.)
Running Side Clearance .............................................................................. 0.02/0.13 mm (0.001/0.005 in.)
1
Values are in Metric units. Values in parentheses are English equivalents. Lubricate threads with engine oil prior to
assembly, EXCEPT for air cleaner base thread forming screw - install dry.
Not For Resale
www.SmallEngineDiscount.com
To Next Page
Loading...
Need help?
General