Repair
Lubricating system
Installation
u Clean sealing area.
u Lubricate filter seal 3 with engine oil.
u Screw spin-on oil filter 1 in filter head 2 until it contacts base.
u Tighten filter by hand by 1/2 turn.
Specific values
Not applicable.
Tightening specifications
Refer to standard tightening torques. (For more information see: 5.3 Standard tightening
torques, page 268.)
3.11.4 Oil cooler by-pass valve (SL 212)
Previous tasks
Not applicable.
Specific safety instructions
Information
Risks of damage to the engine
Pressure loss if the valve is not in place.
u Engine stopped and secure against starting.
NOTICE
Risk of property damage by reuse of sealing.
Leaks by faulty seal.
u Replace all sealings.
Special tools
Not applicable.
Consumables and equipment
Make sure that the following consumables and equipment are available:
– Rags
– Cleaner
194
© 2022 by Kohler Co. All rights reserved.
KD62V12 33525088601_8_1 EN_US
2022-09
To Next Page
Loading...
Need help?
General
