Repair
Driving gear
3.7.2 Torsional vibration damper removal and installation - SL2-1340
Previous tasks
q Remove the protection plate of the torsional vibration damper. (For more information see:
3.4.1 Vibration damper cover removal and installation, page 58.)
Specific safety instructions
NOTICE
Risk of engine failure.
Shock or damage to the torsional vibration damper will lead to engine failure.
u Observe the lifting instructions.
u Use only adapted lifting devices.
u In case of shock or damage, always replace the torsional vibration damper.
Special tools
Special tool Designation
Guiding rod M28 – Damper (x2)
Locking device
Tab. 21: Special tools
Consumables and equipment
– Rags
– Cleaner
KD62V12 33525088601_8_1 EN_US
2022-09
© 2022 by Kohler Co. All rights reserved.
99
To Next Page
Loading...
Need help?
General
