Safety
Accessible areas
2.8.2 Engine in commissioning — test run
Fig. 36: Engine areas during commissioning and test run — view from above and driving end
Access to the following areas for commissioning and test run tasks is permitted:
A Engine free end C Engine driving end
B Engine sides D Above the engine
Access to the following areas is forbidden:
E Below the engine
2.8.3 Emergency stop
Information
The machinery owner is responsible for marking the hazardous areas and the fail-safe devices.
The emergency stops must withstand the operational conditions, be kept visible and legible
during the entire life cycle.
Additional emergency stops and measures according to project standards and local regulations
and standards are possible.
The emergency stop button and signals, as the acknowledge buttons are described in the
generator set manual.
NOTICE
Property damage by misuse of emergency stops.
Misusing the emergency stops to stop the engine could lead to property damage.
u Initiate an emergency stop only in emergency situations.
Initiating an emergency stop:
u Press the emergency stop button.
After an emergency stop:
u Remedy to the emergency situation.
u Acknowledge the emergency stop button and signals.
KD62V12 33525088601_8_1 EN_US
2022-09
© 2022 by Kohler Co. All rights reserved.
47