Komatsu PC110R-1 User Manual

192
TECHNICAL DATA
5.1.3 LIFTING CAPACITIES
(Only for machines with overload alarm device)
CAUTION
• According to the harmonized standard EN474-5 (§ 4.1.7.5), the machine cannot lift weights exceeding
1000 kg, unless it is provided with suitable devices.
DANGER
• Carry out lifting operations only with the machine positioned on firm and level ground.
• Before lifting the load, make sure that the overload alarm device has been connected (see “3.3.3 pos. 8
BOOM OVERLOAD ALARM SWITCH”).
5.1.3.1 LIFTING CAPACITY TABLE
A - Arm length L= 1850 mm
B - Arm length L= 2000 mm
C - Arm length L= 2300 mm
D - Monoboom length L= 3150 mm
D - Two-piece boom length L= 3864 mm
E - Standard counterweight mass kg 1450
F - Operating hydraulic pressure (30 MPa / 300 bar)
G - Standard bucket length and mass L= 900 / kg 300
H - Machine positioned on firm and level ground
L
L
L
L

Komatsu PC110R-1 Specifications

General

Brand	Komatsu
Model	PC110R-1
Category	Excavators
Language	English

Summary

Foreword

Information on Safety

Pictograms and Relevant Meanings

Explains symbols on warning plates and their meanings for safe operation.

General Precautions

Outlines essential safety rules, guards, clothing, and modifications.

Precautions Before Starting Engine

Details safety checks for the work site, fire prevention, and cab readiness.

Precautions When Working

Covers safe operation practices, including starting, moving, and working on slopes.

Product Identification

Machine Serial Number

Details the location and importance of the machine's unique serial number.

Machine Identification Plate

Describes the CE mark plate and its compliance with standards.

Instruments and Controls

Instruments

Identifies and explains the function of key dashboard indicators like hour meter and fuel level.

Warning Lights

Explains various warning lights and their meanings for machine status and alerts.

Switches and Push Buttons

Details the function and location of various operational switches and buttons.

Machine Controls

Illustrates and explains the operation of levers, pedals, and other machine controls.

Use of the Machine

Checks Before Starting the Engine

Provides a checklist for essential visual and daily checks before engine startup.

Starting the Engine

Explains the procedures for starting the engine in warm and cold conditions.

How to Move the Machine

Covers essential steps for safely moving the machine, including steering and slopes.

Maintenance Plan

Maintenance Every 50 Hours

Details routine checks and lubrication required every 50 operating hours.

Maintenance Every 250 Hours

Outlines specific checks and adjustments needed every 250 operating hours.

Maintenance Every 500 Hours

Specifies tasks such as filter changes and fluid checks at 500-hour intervals.

Maintenance Every 2000 Hours

Details major service items like oil changes for reduction gears and coolant replacement.

Technical Data

Standard Overall Dimensions

Provides key dimensions for monoboom and two-piece boom configurations.

Technical Characteristics

Lists specifications for mass, engine, electrical system, and speeds.

Lifting Capacities

Details load capacities based on arm length and working radius.