PRECAUTIONS TO BE TAKEN WHEN WORKING
38
2.4.13 PARKING THE MACHINE
RYA15400
RWA02000
RYA12930
• Park the machine on firm and level ground. If this is not possible
and it is necessary to park on a slope, position the machine with
the bucket directed downwards and carry out the following oper-
ations:
1 - Rotate the bucket to the dumping position and lower the
arms until thrusting the teeth into the ground.
2 - Stop the engine.
3 - Put wedges or safety blocks under the tracks.
• Always rest the work equipment on the ground; if it is necessary
to park with raised arms, make sure that the safety locks are en-
gaged.
• Lock the equipment control by shifting the safety device lever to
the lock position.
• When leaving the machine, make sure that the cab windows are
completely closed, remove the ignition key and lock the door.
• If it is necessary to park on public roads, provide for signalling
the presence of the machine according to the local regulations
in force (signalling fires, fences, road works ahead, alternated
direction and direction signs, etc.).
To Next Page
Loading...
Need help?
General
