93
GUARDS AND DRIVER’S SEAT
3.5.7 SAFETY BELT
3.5.8 EMERGENCY EXIT
• Before starting the engine, fasten the safety belt.
• The safety belt must be changed when it is frayed, dam-
aged or worn and in any case every 4 years.
The safety belt (1) is of the type with two coupling points and ad-
ustable length (2); it must be well tightened and hold the opera-
tor’s hips, while leaving the upper part of the body completely
free.
RWAA5360
21
The machine is provided with an emergency exit located in the
rear window (1).
Inside the cab you will find a hammer (2) to be used to break the
window (1) in case of emergency.
IMPORTANT
• Make sure that the hammer is always available and in the
correct position inside the cab.
RYA14240
1
RYA14250
2
RWA05970
1
To Next Page
Loading...
Need help?
General
