2-62
PC130/150LGP-6K ENG
12.OPERATION
12.6 STOPPING MACHINE
• Avoid stopping suddenly. Give yourself ample room when
stopping.
• When stopping the machine, select flat hard ground and avoid
dangerous places. If it is unavoidably necessary to park the
machine on a slope, insert blocks underneath the the track
shoes. As an additional safety measure, thrust the bucket into
the ground.
• If the control lever is touched by accident, the work equipment
or the machine may move suddenly, and this may lead to a
serious accident. Before leaving the operator's compartment,
always set the safety lock lever securely to the lock position.
1. Put the left and right travel levers in the neutral position, then stop
the machine.
WARNING
To Next Page
Loading...
Need help?
General
