2-64
PC130/150LGP-6K ENG
12.OPERATION
12.8 OPERATION OF WORK EQUIPMENT
If any lever is operated when in the deceleration range, the en-
gine speed will suddenly increase, so be careful when operating
the levers.
The work equipment is operated by the left and right work equipment
control levers. The left work equipment control lever operates the arm and
swing, and the right work equipment control lever operates the boom and
bucket.
The movements of the lever and work equipment are as shown in the
diagrams on the right. When the levers are released, they automatically
return to the neutral position and the work equipment is held in place.
• If the work equipment control lever is returned to the neutral position
when the machine is stopped, even if the fuel control dial is set to
FULL, the auto-deceleration mechanism will act to reduce the engine
speed to a mid-range speed.
WARNING
To Next Page
Loading...
Need help?
General
