5-7
PC130/150LPG-6K ENG
28.2 OPERATION
• Be careful when operating the pedal in the deceleration range.
The engine speed will rise suddenly.
• Do not put your foot on the pedal except when operating the
pedal. If rest your foot on the pedal during operations, and it is
depressed by accident, the attachment may move suddenly
and cause serious damage or injury.
Operate the attachment as follows.
28.2.1 USING BREAKER
Set the lock pin to position (half stroke), and depress the right control
pedal in the direction of the arrow to operate the breaker.
NOTICE
If the breaker is operated with the lock pin position (full stroke),
the hydraulic equipment will be damaged or may overheat.Never op-
erate the breaker with the lock pin in this position.
Precautions when using
• Check that the stopper valve is in the FREE position.
• Check that the selector valve is in the position for using the breaker.
28. MACHINES READY FOR ATTACHMENTS
WARNING
To Next Page
Loading...
Need help?
General
