3-46
PC130/150LGP-6K ENG
24. SERVICE PROCEDURE
24.4 EVERY 50 HOURS SERVICE
24.4.1 DRAIN WATER AND SEDIMENT FROM FUEL
TANK
1. Carry out this procedure before operating the machine.
2. Prepare a container to catch the fuel that is drained.
3. Open valve at the bottom of the tank and drain the sediment and
water that has accumulated at the bottom together with fuel.
When doing this, be careful not to get fuel on yourself.
4. When only clean fuel comes out, close drain valve .
NOTICE
Never use trichlene for washing the inside of the tank.
To Next Page
Loading...
Need help?
General
