1-27
PC130/150LGP-6K ENG
8. PRECAUTIONS FOR MAINTENANCE
WARNING: Failure to follow
these safety precautions may
lead to a serious accident.
8.2 DURING MAINTENANCE
PERSONNEL
Only authorized personnel can service and repair the machine. Do not allow unauthorized personnel into the
area. If necessary employ an observer.
Extra precaution should be used when grinding, welding and using a sledge-hammer.
ATTACHMENTS
• Appoint a leader before starting removal or installation operations for attachments.
• Do not allow anyone other than the workers close to the machine or attachment.
• Place attachments that have been removed from the machine in a
safe place so that they do not fall. Put a fence around the attach-
ments and set up No Entry signs to prevent unauthorized persons
from coming close.
WORK UNDER THE MACHINE
• Stop the machine on firm, level ground and always lower all work equipment to the ground before performing
service or repairs under the machine.
• Always block the track shoes securely.
• It is extremely dangerous to work under the machine if the track
shoes are off the ground and the machine is supported only by the
work equipment. Never work under the machine if the machine is
poorly supported.
WORK ON TOP OF THE MACHINE
• When carrying out maintenance on top of the machine, make sure that the footholds are clean and free of
obstructions, and follow the precautions below to prevent yourself from falling.
• Do not spill oil or grease.
• Do not leave tools lying around.
• Mind your step when you are walking.
• Never jump down from the machine. When getting on or off the machine, always use the steps and handrails,
and maintain three-point contact (both feet and one hand or both hands and one foot) at all times.
• Use protective equipment if necessary.
To Next Page
Loading...
Need help?
General
