2-87
PC130/150LGP-6K ENG
13. TRANSPORTATION
13.2 PRECAUTIONS FOR LOADING
When loading the machine, park the trailer on a flat firm roadbed.
Keep a fairly long distance between the road shoulder and the
machine.
After loading to the specified position, secure the machine as follows.
1. Fully extend the bucket and arm cylinders, then slowly lower the
boom.
2. Stop the engine and remove the key from the starting switch.
3. Lock all the control levers securely with the safety lock lever.
4. When transporting the machine, place rectangular timber under-
neath the front and rear track shoes to prevent the machine from
moving about. Also, hold it down with chains or rope. Be particularly
careful to ensure that the machine does not slip sideways.
NOTICE
When transporting the machine, place rectangular timper under
one end of the bucket cylinder to prevent it touching the ground,
thereby saving it from possible damage.
WARNING
To Next Page
Loading...
Need help?
General
