METHOD FOR OPERATING WORK EQUIPMENT
WARNING
For control patterns other than the standard control method (ISO pattern), see ATTACHMENTS AND OP-
TIONS.
Use the control levers to operate the work equipment.
When the levers are released, they return to NEUTRAL position and the work equipment is held in that position.
•
Arm operation
Move the L.H. work equipment control lever back and
forth.
Arm moves in or out.
• Boom operation
Move the R.H. work equipment control lever back and
forth.
Boom moves up or down.
OPERATION MACHINE OPERATIONS AND CONTROLS
3-179
To Next Page
Loading...
