CHECKS AFTER INSPECTION AND MAINTENANCE
If
you forget to perform the inspection and maintenance, unexpected problems may occur, and this may lead to
personal injury. Always observe the following.
Checks after operation (with engine stopped)
• Have any inspection and maintenance points been forgotten?
• Have all inspection and maintenance items been performed correctly?
• Have any tools or parts been dropped inside the machine? It is particularly dangerous if parts are dropped
inside the machine and get caught in the lever linkage mechanism.
• Are there any leakage of coolant or oil? Have all nuts and bolts been tightened?
Checks while the engine is running
• For the checks when the engine is running, see SAFETY, “TWO WORKERS FOR MAINTENANCE WHEN
ENGINE IS RUNNING” and pay attention to safety.
• Increase the engine speed to check for the leakage of fuel or oil.
• Check if the inspected and serviced area is normally operated.
FIX FLOOR SECURELY
After opening or closing the floor for the inspection and maintenance, fix the floor with the floor tilt lock bolt se-
curely. If it is not securely fixed, it may lead to a serious personal injury or death.
FUEL AND LUBRICANTS TO MATCH THE AMBIENT TEMPERATURE
It is necessary to select fuel or lubricant according to the ambient temperature.
PRECAUTIONS FOR MAINTENANCE MAINTENANCE
4-4
To Next Page
Loading...
Need help?
General
