TROUBLES AND ACTIONS
ACTIONS WHEN RUNNING OUT OF FUEL
When
starting the engine again after running out of fuel, fill with fuel, and bleed the air from the fuel system
before starting the engine.
Always check the fuel level to prevent running out of fuel.
If the engine has stopped due to run out of fuel, all air must be sufficiently bled from the fuel circuit.
PROCEDURES FOR BLEEDING AIR FROM FUEL CIRCUIT
1.
Pull engine rear cover (1) toward you to open it.
Open
engine rear cover (1) fully and it is secured by rod
(2).
2.
Pull cooling cover (3) toward you to open it.
3.
Turn rod (4) to LOCK position (L), and fix cooling cover (3)
with the rod.
4.
Open dirt cover (5).
Open
dirt cover (5) fully and it will be secured by cover
support lever (6).
5.
Fill up the fuel tank with fuel.
TROUBLES AND ACTIONS OPERATION
3-234
To Next Page
Loading...
