OPERATION OPERATION
3-88
3. Operate lift arm control lever (3) to set the work equipment
to the travel posture shown in the diagram on the right.
4. Depress right brake pedal (5) and turn parking brake switch
(6) to the OFF (RELEASE) position to release the parking
brake.
Keep right brake pedal (5) depressed.
REMARK
If the parking brake is still actuated when parking brake
switch (6) is at the OFF (RELEASE) position, turn the park-
ing brake switch ON, then turn it OFF again.
5. Set speed control lever (7) to the desired position.
6. Set directional lever (8) to the desired position.
To Next Page
Loading...
Need help?
General
