HANDLING JOYSTICK STEERING SYSTEM ATTACHMENTS, OPTIONS
6-46
FNR SWITCH 0.
The F/N/R switch (3) at the top of the joystick steering lever is
used to switch the transmission between FORWARD and
REVERSE.
(F) position: FORWARD
(N) position: Neutral
® position: REVERSE
Use the shift up and shift down switches at the top of the joy-
stick steering lever to change the speed range.
JOYSTICK STEERING LEVER 0.
Use this lever (4) to steer the machine to the left or right.
When traveling, operate this lever in the direction to turn the
machine.
(a): Left turn
(b): Right turn
(N): Neutral
JOYSTICK ON/OFF SWITCH 0.
When this switch (5) is turned ON, the joystick steering is
switched ON.
Position (a): ON (possible to steer with joystick)
Position (b): OFF (impossible to steer with joystick)
HI/LOW SELECTOR SWITCH 0.
This switch (6) is used to switch the steering speed between
HIGH and LOW.
Position (a): HI
The articulating speed of the machine is high in relationship to
the operation of the joystick steering lever, so this setting is
suitable for comparatively fast cycle times.
Position (b): LOW
The articulating speed of the machine is low in relationship to
the operation of the joystick steering lever, so this setting is
suitable for operations loading loose materials and materials
that easily spill.
To Next Page
Loading...
Need help?
General
