PRECAUTIONS FOR OPERATION SAFETY
2-14
Before charging or starting the engine with a different power source, melt the battery electrolyte and check for
frost and leakage of battery electrolyte before starting.
OPERATION 0.
CHECKS BEFORE STARTING ENGINE 0.
When carrying out the checks, move the machine to a wide area where there are no obstructions, and operate
slowly. Do not allow anyone near the machine.
! Always fasten your seat belt.
! Check for any abnormality in the sound of the
machine,vibration, heat, smell, or gauges; check also that
there is no leakage of oil or fuel.
! Check for any abnormality in the sound of the machine,
vibration, heat, smell, or gauges; check also that there is no
leakage of oil or fuel.
! If any abnormality is found, carry out repairs immediately.
! Before driving the machine or starting operations, check
that safety bar (1) is securely fixed at the FREE position.
PRECAUTIONS WHEN TRAVELING IN FORWARD OR REVERSE 0.
! Before travelling, check again that there is no one in the surrounding area, and that there are no obstacles.
! Before travelling, sound the horn to warn people in the area.
! Always operate the machine only when seated.
! Do not allow anyone apart from the operator to ride on the machine.
! Check that the back-up alarm (alarm buzzer when machine travels in reverse) works properly.
! Always lock the door and windows of the operator‘s compartment in position (open or closed).
On jobsites where there is a hazard of flying objects or of objects entering the operator‘s compartment, check
that the door and windows are securely closed.
! If there is an area to the rear of the machine which cannot
be seen, position a signal person. Take special care not to
hit other machines or people when turning or swinging the
machine.
Always be sure to carry out the above precautions even when
the machine is equipped with mirrors.
To Next Page
Loading...
Need help?
General
