ATTACHMENTS, OPTIONS HANDLING LOAD METER
6-3
SWITCHES 0.
For details of switches (3) and (4), see “MONITOR PANEL MODE SELECTOR SWITCH 1 ( 3-42 )“ and “MONI-
TOR PANEL MODE SELECTOR SWITCH 2 ( 3-43 )“.
LOAD METER CANCEL SWITCH 0.
When the measured data is not needed, press the switch at the
top of the bucket control lever.
The data that has just been calculated will be canceled and the
display will return to the display before measuring.
LOAD METER SUB TOTAL SWITCH 0.
Press the switch at the side of the bucket control lever to set
the TOTAL LOADED display (when in addition mode) or
REMAINING TARGET display (when in remain mode) to 0.
(1) Load meter cancel switch (3) Monitor panel mode selector switch 1
(2) Load meter sub total switch (4) Monitor panel mode selector switch 2
To Next Page
Loading...
Need help?
General
