ATTACHMENTS, OPTIONS HANDLING JOYSTICK STEERING SYSTEM
6-47
HORN SWITCH 0.
Press this switch (7) at the top of the joystick steering lever to
sound the horn.
By using this switch, it is possible to sound the horn without
taking your hand off the lever.
CONSOLE LOCK LEVER 0.
For details of this lever (8), see “GETTING IN OR OUT OF OPERATOR‘S CAB ( 6-49 )“.
HEIGHT ADJUSTMENT LOCK LEVER 0.
For details of this lever (9), see “ADJUSTMENT OF JOYSTICK CONSOLE ( 6-49 )“.
ANGLE, FORE/AFT ADJUSTMENT LOCK LEVER 0.
For details of this lever (10), see “ADJUSTMENT OF JOYSTICK CONSOLE ( 6-49 )“.
STRUCTURE AND FUNCTION OF JOYSTICK STEERING 0.
! The joystick steering system is a system used to steer
wheel loaders with a lever instead of a steering wheel.
The joystick enables steering with small, light movements,
and helps to reduce operator fatigue.
When joystick ON/OFF switch (1) is turned ON, it becomes
possible to operate the steering with the joystick.
When the joystick steering is in use, the joystick pilot lamp on
the machine monitor lights up.
! On machines equipped with the joystick steering system, it
is possible to use joystick ON/OFF switch (1) to select the
steering and transmission operation method as shown in
the table below.
In addition, on machines equipped with joystick steering,
the transmission auto shift function is also included.
The differences between operation using the joystick lever
and operation using the steering wheel are as follows.
To Next Page
Loading...
Need help?
General
