ATTACHMENTS, OPTIONS HANDLING AUTOMATIC AIR-CONDITIONER
6-41
4. Press mode selector switch (4) and select the desired vent.
The display of the vent selection © on the monitor panel will
change according to the selection.
5. Press RECIRC/FRESH selector switch (6) and select recir-
culation of the air inside the cab (RECIRC) or intake of fresh
air from outside (FRESH).
STOPPING MANUAL OPERATION 0.
Press OFF switch (1). The display of the set temperature (a)
and air flow (b) on the monitor panel, and the lamps at the top
of auto switch (5) and air conditioner switch (8) go out, and the
air conditioner stops.
PRECAUTIONS WHEN USING 0.
For the precautions when using the air conditioner, see “PRECAUTIONS WHEN USING ( 6-34 )“ in the section on
the air conditioner in the ATTACHMENTS, OPTIONS section.
INSPECTION AND MAINTENANCE 0.
When carrying out inspection and maintenance of a machine equipped with air conditioner, see “MAINTENANCE
SCHEDULE CHART ( 4-15 )“.
To Next Page
Loading...
Need help?
General
