OPERATION OPERATION
3-93
STOPPING MACHINE 0.
WARNING
! Avoid stopping suddenly. Give yourself ample room
when stopping.
! Even if the parking brake switch is turned ON, there is
danger until the parking brake pilot lamp lights up, so
keep the brake pedal depressed.
NOTICE
Never use the parking brake switch to brake the machine when traveling except in an emergency. Apply
the parking brake only after the machine has stopped.
1. Release accelerator pedal (1), then depress brake pedal (2)
to stop the machine.
2. Place directional lever (3) in N (neutral) position.
3. Turn parking brake switch (4) to ON to apply the parking
brake.
REMARK
When the parking brake is applied, the transmission is
automatically returned to neutral.