7-16 bizhub 225i
Store Address
7
7.2
7.2.12 Changing or deleting the polling RX program
1 Press the Utility key.
2 Use the +/, key to select [DIAL REGISTRATION], then press the OK key.
3 Use the +/, key to select [PROGRAM DIAL], then press the OK key.
4 Press the One-Touch Dial Key that contains the polling RX program you want to change or delete.
5 Use the +/, key to select [EDIT] or [DELETE], then press the OK key.
% If [EDIT] is selected, go to the next step.
% If [DELETE] is selected, the information registered in the program dial is deleted, and the display re-
turns to the Store Address screen.
6 Use the +/, key to select [ADD] or [CHECK/EDIT], then press the OK key.
% If [ADD] is selected, enter a destination, then press the OK key.
% If [CHECK/EDIT] is selected, go to the next step.
7 Use the +/, key to select a target destination, then press the OK key.
% To delete the displayed destination, press the Clear/Stop key, then select [YES] in the displayed
screen.
% Repeat this procedure until checking and correcting a destination is completed. After this, press the
Back key.
8 Select [RETURN], then press the OK key.
This registers settings, and returns to the Store Address screen.
7.2.13 Changing or deleting the relay instruction transmission program
1 Press the Utility key.
2 Use the +/, key to select [DIAL REGISTRATION], then press the OK key.
3 Use the +/, key to select [PROGRAM DIAL], then press the OK key.
4 Press the One-Touch Dial Key that contains the relay instruction transmission program you want to
change or delete.
5 Use the +/, key to select [EDIT] or [DELETE], then press the OK key.
% If [EDIT] is selected, go to the next step.
% If [DELETE] is selected, the information registered in the program dial is deleted, and the display re-
turns to the Store Address screen.
6 When necessary, use the One-Touch Dial Key, Speed Dial, or Keypad to specify a destination, then
press the OK key.
7 If necessary, change the Relay User Box ID or password using the Keypad, then press the OK key.
This registers settings, and returns to the Store Address screen.
RELAY INITIATE
DESTINATION
To Next Page
Loading...
Need help?
General
