Konica Minolta bizhub 225i User Manual

bizhub 225i 4-4
4.1 Transmission with F-Code (F-Code TX)
4
4.1.1 Specifying an F code at fax transmission
Specify an F code when typing in a fax number directly using the Keypad.
1 Enter a destination fax number using the Keypad.
2 Press the , key.
3 Use the +/, key to select [SUB, SID SETTING], then press the OK key.
4 Enter a SUB address using the Keypad, then press the OK key.
% To correct a numeric value, press the Clear/Stop key.
% When entering a password, go to Step 5.
% When not entering a password, press the OK key, and go to Step 6.
5 Enter the password using the Keypad, then press the OK key.
% To correct a numeric value, press the Clear/Stop key.
6 Press the Start key.
This starts scanning and sending.
SUB,SID SETTING
SUB
SID

Konica Minolta bizhub 225i Specifications

General

Brand	Konica Minolta
Model	bizhub 225i
Category	Printer
Language	English