Konica Minolta bizhub 225i User Manual

bizhub 225i 7-21
7.4 Fax TX setting
7
7.4 Fax TX setting
Configure various transmission settings for fax communication.
7.4.1 Fax TX setting items
dReference
Fax TX settings can also be configured using LSU (Local Setup Utility). For details, refer to page 11-4.
Settings can also be configured using Web Connection. For details, refer to Web Connection - [Address] -
[Fax Configuration] of [User's Guide Network Administrator].
7.4.2 Specifying the scanning density
1 Press the Utility key.
2 Use the +/, key to select [FAX TX OPERATION], then press the OK key.
3 Use the +/, key to select [DENSITY LEVEL], then press the OK key.
4 Use the */) key to select the density, then press the OK key.
This returns to the fax TX settings screen.
7.4.3 Specifying the quality priority
1 Press the Utility key.
2 Use the +/, key to select [FAX TX OPERATION], then press the OK key.
3 Use the +/, key to select [QUALITY PRIORITY], then press the OK key.
4 Use the +/, key to select a target image quality, then press the OK key.
This returns to the fax TX settings screen.
Number Fax TX setting Contents
1 [DENSITY LEVEL] Select the default density to scan the original from five levels.
When the paper color (background color) is darker, adjust to the
light side. When a text is faint or colored, adjust to the dark side.
• The factory default is [ ].
2 [QUALITY PRIORITY] Specify the default image quality (resolution) to scan the original
with a combination of [STD/TEXT], [FINE/TEXT], [S-FINE/TEXT],
[STD/PHOTO], [FINE/PHOTO], and [S-FINE/PHOTO].
• The factory default is [STD/TEXT].
3 [DEFAULT TX] Select the default transmission method from [MEMORY TX] and
[ADF TX].
• The factory default is [MEMORY TX].
Tips
This setting is displayed when optional Reverse Automatic
Document Feeder DF-633 is installed.
4 [HEADER] To specify whether to add a header (transmission date and time,
sender name, sender's fax number, and other items) when
transmitting a fax, select [ON] or [OFF] as the default.
• The factory default is [ON].
Tips
This setting item may not be displayed in some regions.
5 [CONFIRM FAX NO.] When specifying a fax destination with direct input, a screen ap-
pears prompting you to enter the fax number again for confirma-
tion. Entering the fax number twice prevents one from entering
incorrect destinations. Select [ON] or [OFF] as needed.
• The factory default is [OFF].

Konica Minolta bizhub 225i Specifications

General

Brand	Konica Minolta
Model	bizhub 225i
Category	Printer
Language	English