Transmission applications
7
Network Fax 7-3
7 Transmission applications
7.1 Opening the scan setting screen
!
Detail
The use of the Comm. Setting screen is not available for the network fax.
Press the key for the function you want to set to open the screen in which
you can set the function.
You can combine more than one function; however, you cannot select
functions that are not compatible with a function previously selected.
Those functions appear dimmed on the control panel.
If you send a fax with an application function, open the Scan Setting screen
and set the functions you want to use.
1 Press [Fax] on the control panel to open the fax screen.
2 Press [Scan Setting].
To Next Page
Loading...
Need help?
General
