11
Explanation of reports and lists
11-10 Network Fax
11.3 TX report
Manual printout
The TX Result Report Check screen appears at the transmission if [ON] is
selected at [Report Settings]-[TX Report] by the Utility Mode.
Press [YES] to print the TX result report. Press [NO] to not print the report.
For details, see "Report settings" on page 10-69.
Automatic printout
Automatic printout can be set to [ON], [If TX Fails] or [OFF] with [TX Report]
at [Report Settings] of Utility Mode. For details, see "Report settings" on
page 10-69.
*
The actual reports may be different from the reports in this manual.
Item Description
No.: Serial numbers are assigned to each transmission and reception.
Destination: The following is shown.
• Name when name is registered in abbreviated dialing or entry list
• Destination
Start Time: The time at which communication started is shown.
Time: Fixed in "-:-:-".
Prints: The number of pages transmitted is shown. In the case of memory trans-
mission, the number of pages able to be transmitted and the total
number of pages are shown in the form of a fraction.
To Next Page
Loading...
Need help?
General
