Utility mode
10
Network Fax 10-13
TX/RX Setting
Administrator Setting >> Fax Setting >> TX/RX Setting
Sets the print method at the transmission/reception mode. (page 10-60)
*1
: The displays are different depending on the country.
*2
: To make the setting of [Print Paper Size] enable, set [Tray Selection for
RX Print] to [Auto].
*3
: Tray type may be different depending on the installed option.
*4
: When [Min. Reduction for RX Print] is set to [x1.0], [Print Paper
Selection] and [Tray Selection for RX Print] are set to [Auto]. [Print Separate
Fax Pages] is turned to [OFF].
*5
: When receiving a fax in the color mode, the text is always recorded in
life size.
Item Description Available value
Duplex Print
(RX)
When set to ON, the original received is
printed on both sides of the paper.
OFF
*
/ ON
Inch Paper Pri-
ority Over A4
*1
By setting this function ON, inch series
form of paper is preferentially selected for
the received original.
OFF
*
/ ON
Print Paper Se-
lection
When the priority of each size is set:
A record is made in the priority size.
When no priority size is set, a record is
made in the nearest size.
When the fixing of each size is set:
A record is made only in the size set.
Auto Select
*
/ Fixed Size
/ Priority Size
While in the reception in
color mode, this is fixed
to [Auto Select].
Print Paper
Size
*1 *2
Set the paper size on which the docu-
ment received is printed.
The default varies according to the set-
ting of [Inch Paper Priority Over A4].
A3 / B4 / A4
*
/ 81/2 e 11
/ 81/2 e 14 / 11 e 17
Tray Selection
for RX Print
*3
Determines the paper tray if you want to
fix the paper tray for received document.
Auto
*
/ Tray 1 / Tray 2 /
Tray 3 / Tray 4
While in the reception in
color mode, this is fixed
to [Auto].
Min. Reduction
for RX Print
*4
*5
Set the output magnification of the origi-
nal received.
87-96
*
/ e 1.0
Print Separate
Fax Pages
*6
Determines the default of transmission
mode.
OFF
*
/ ON
No. of Sets (RX) Set the number of prints for the received
document.
1*-10